How To Flash A Nokia Phone Using JAF

By: Unknown 0 comments

How To Flash A Nokia Phone Using JAF

INSTALLING AND SETTING UP JAF

1. Download this file

http://ul.to/fxjr5y

[Thats Include All File You Need]

2. UNRAR the file to your desktop

3. Open the folder 

4. Install JAFSetup_1.98.62.exe

5. Install JAF to the default location

* Note you only have to do the following if you are using Windows Vista, Windows 2003/2008 Server or Windows 7>

A. Right click on "OGM_JAF_PKEY_Emulator_v 5.exe"

B. Scroll down to "Properties", left click on "Properties"

C. Left click the "Compatibility" at the top of the popup window.

D. "CHECK" run this program in "Compatibility" mode

E. In the select box. select "Windows XP" or Windows XP SP?

F. left click "APPLY", then left click "OK"

Getting Your Firmware Downloaded & Ready for Flashing

1. Go to "C:\Program Files\Nokia".

2. Create a folder called "Phoenix" > C:\Program Files\Nokia\Phoenix

3. Open C:\Program Files\Nokia\Phoenix

4. Create a folder called "Products" > C:\Program Files\Nokia\Phoenix\Products

5. Open C:\Program Files\Nokia\Phoenix\Products

6. Create a folder with phones ROM VERSION > RM-xxx, C:\Program Files\Nokia\Phoenix\Products\RM-xxx

7. Open C:\Program Files\Nokia\Phoenix\Products\RM-xxx, leave it open. xxx - your Rm version

9. Download your firmware using "navifirm.exe"

10. save your firmware to > C:\Program Files\Nokia\Phoenix\Products\RM-xxx

* Note>

RM-xxx will be different depending on your country or region (IE, RM-505, RM-555, etc...)

USING JAF TO INSTALL COOKED ROMS

First Install Nokia pc suite if you dont have it installed already (Cable Drivers Are installed with them and needed). Then follow these,

1. Form main JAF folder click on "OGM_JAF_PKEY_Emulator_v 5.exe" then click Go

2. JAF gets loaded

3. In JAF left click the BB5 tab

4. Under "Flash Settings",

A. Uncheck "CRT 308"

B. Check "Manual Flash" "Dead USB"

C. Check "Normal Mode"

D. Check "Use INI"

5. Wait for INI popup window to open. 

Then a list will appear containing all phone models.

6. Scroll down to your USB FIRMWARE CABLE TYPE

7. Select firmware type (RM-???)

If JAF doesn't find the RM-xxx, just add the following two lines to the end of the file jaf_nok4models.ini (normally found in C:\Program Files\ODEON\JAF\):

[RM-xxx]Description=Nokia X6 CABLE [RM-XXX Write your RM version in xxx , write your phone model replacing "Nokia X6"]

* Note RM-??? will be your country or region type.

8. Left click "OK"

9. Your FIRMWARE FILES ARE SETUP AND LOADED READY FOR FLASHING BY JAF

10. Turn Off Your Phone connect it to your pc.

11. In the "Operations Box", left click on "FLASH"

[Then Click YES when a dialog appears like on the picture below]

12. Then Jaf will ask for turn on your phone click turn on [Now Just press the Power Button on your phone a little (just for about 1 second)]

13. Wait for JAF to start flashing

14. After flash complete your phone will auto start 

It's that simple, you won't ever brick your phone if you do this way.